เครื่องรีดแผ่นโลหะไฮดรอลิก 4 ลูกกลิ้ง BEKE

Main Characteristics

This rolling machine is three roll symmetrical rolling plate equipment. Mainly used for process in cold (S 245Mpa) within the sheet roll into all the cylinders with different diameters, widely used in boilers, chemical, mining, construction, shipbuilding and other machinery industry.

A)This machine is a symmetrical bending plate machine. Through the lower pressure of the upper roller and the upper and lower rollers roll again each other, the roll forming of the cylindrical workpiece is finished.

B)The realization of the upper roller lifting movement is that the auxiliary motor drives the worm and worm wheel mechanism under the left and right roller bearing seats to move through the auxiliary motor, so that the wire rotator fixed on the worm wheel can make the lifting screw move up and down.

C)This machine is composed of two parts, the working part and the transmission part on the whole chassis of the welding. The working part consists of a left and right roller bearing seat, an upper roll, two lower rolls, a worm gear pair and some auxiliary parts. The lower roller is an active roller, and the upper roller can be adjusted along the height direction. The drive part is composed of the main motor, the main deceleration motor and other auxiliary parts.

D)The transmission of the roller is realized by the main motor through the main reducer. The output shaft of the main reducer is transmitted to the two lower roller through a set of gears. The transformation of the transmission direction of the roller is achieved by the commutation of the main motor.

E)Unloading board device is used when the cylinder after winding, before disengaging the left bearing can tilt the bearing seat, and on the rise in the first place, and end with the balance pull pull on the roller, and then tilting the bearing seat pin out, overturned tilting bearing, rolling workpiece can be completed from one end of the upper roller.

F)The main components are: three roller first heat treatment tempering HB240-280, second heat treatment surface quenching HRC48-52, bracket for welding parts, after welding processing, chassis for welding parts, lifting screw and worm 45 steel forgings.

G)The electric part, with famous brand and high quality products, is stable in movement, long life, safe and reliable, and easy to operate.